RP 2KD Series
The TechValve RP 2KD metering system is a 2 component electronic servo driven fixed ratio system. The system produces ratio accuracies in the +/- 1% range and require no tools or mechanical adjustments. All setup and control functions are set using the touch screen HMI.

The RP 2KD uses Linear Rod Pumps for precise metering. With no pistons to wear or check valves to clog or stick the units are very reliable and can handle highly abrasive fluids. They can also be fed from any type of reservoirs, pressure pots or transfer pumps.

The onboard H.M.I. touch screen control panel gives the operator full control of
all the systems standard programmable features. Features such as:

RP 2KD Series
  • Shot size.
  • Start/Stop signal.
  • Material flow rates.
  • Ratio check flow rate.
  • A-B jog controls.
The touch screen control is very intuitive and requires no programing experience on the part of the operator. The touch screen is located inside the electrical enclosure for protection against over spray and contamination or outside for ease of viewing.

All programing pre-sets can be set and then locked and only accessed using a multi digit access code.
For manual operation the system uses diaphragm faced digital pressure transducers to activate the metering pumps. When coupled with automation or robotics the system can accept a 5-24vdc, relay or dry contact trigger to start and stop operation.

RP 2KD Series  RP 2KD Series
Proximity sensors for homing and change of direction control.
  RP 2KD Series When coupled with automation or robotics the system can accept a 4-20mv, 5-24vdc, relay or dry contact trigger for start and stop operation.

Our closed loop servo drive guarantees ratio accuracy and powerful, smooth fluid delivery. The PLC control system coupled with the touch screen HMI make set-up simple and easy for both human operators or when coupled with automation or robotics.
RP 2KD Series The TechValve 3500 Drip Free 2K dispense valve with pistol grip can be used as a manual system or remove the pistol grip and fixed mounted for automation/robotic systems.

Using standard 115vac. 60Hz/15-20 amp power makes initial set up fast and easy.

With universal chemical compatibility the RP 2KD can handle a multitude of 2 component materials. Materials such as, epoxies, polyurethanes, silicones, acrylics, polyesters and more.
Technical Specifications
Pump System: Positive Displacement Linear Rod Pump.
Controls: 3.5 “ Touch screen
Material supply: Pressure pots, diaphragm pumps or transfer pumps.
Viscosity range: Water-paste.
Max Inlet Pressure: 2000 psi.
Working Pressure range: 0-2000 psi.*
Flush Valve: The flush valve is manual.
Ratio Range: 1:1-10:1*
Ratio Check Station: Taken from the dispense valve.
Min/Max Flow Rate: 5cc/min 3078.5 cc/min. @1:1 ratio.*
Voltage: Standard 120vac or 220vac. 60hz
Air requirements: 80-100 psi @ 25 cfm.
Static Mixer: Uses static mixers for material blending.
Materials of Construction: Hard anodized aluminum and SS for the pump. Optional entire SS construction.*
Operating Temp Range: 40F-120F
Mounting: Bench top.
Enclosure dimensions: 12 H X 12W X 6 D
  Application dependent*